Site Information

Loading... Please wait...

Porter Cable Slide

rp-pc-instructions-1-.jpg

-Use a drill or drill press to 
  disconnect contact from the
  old battery pack.

-Drill at the weld locations to
 disconnect contact.
-Once drilled through, the
 contact will release.

 

rp-pc-instructions-2-.jpg 

Use a solder gun to detach the
old thermistor (if needed) from
the contact (New thermistor
included with Repack Kit)

rp-pc-instructions-3-.jpg 

Use a grinder to create a porous surface
area for the solder.

 

rp-pc-instructions-4-.jpg 

Solder the new thermistor
to the contact, if needed.

 

rp-pc-instructions-5-.jpg 

Pre-solder the contact and tabs on the Repack

 rp-pc-instructions-6-.jpg

Place contact on the battery
pack and line up contacts with tabs.

 

rp-pc-instructions-7-.jpg 

Once lined up, begin to 
fold tabs over contact.

 

rp-pc-instructions-8-.jpg 

Fold both tabs over the contact
and tuck thermistor into hole
on the Repack.

rp-pc-instructions-13-.jpg 

Solder contact into place.

rp-pc-instructions-14-.jpg 

Use a buffer to polish the 
contact for optimal 
conductivity.