Site Information

Loading... Please wait...

MAC Tools Pod

mt-rp-instructions-1-.jpg
Use an IFIXIT TR10 Torx security screwdriver to open the battery case.

 

mt-rp-instructions-2-.jpg

-Use a drill or drill press to disconnect contact from the old battery pack.
-Drill at the weld locations to disconnect contact.
-Once drilled through, the contact will release.

mt-rp-instructions-3-.jpg

At this time, you can replace the thermostat, if needed.
(New thermostat included with Repack Kit)

mt-rp-instructions-11-.jpg

Old thermostat vs New Thermostat

mt-rp-instructions-4-.jpg

Use a grinder to create a porous surface area for the solder

 

mt-rp-instructions-5-.jpg

Pre-solder contact

mt-rp-instructions-6-.jpg

Pre-solder the tabs on the repack

mt-rp-instructions-7-.jpg

To place contact on battery pack, slide over the tabs on the repack.

mt-rp-instructions-8-.jpg

Fold tabs over the contact

mt-rp-instructions-9-.jpg

Solder into place

mt-rp-instructions-10-.jpg

Use a buffer to Polish the contact for optimal conductivity.

 

mt-rp-instructions-12-.jpg

-Tuck the thermostat into place to minimize pinching.
-Put battery pack into battery case and adjust the contacts to fit.